How To Create A Deck Railing?

The terrace guardrail, or guardrail, is an essential and mandatory piece of equipment for the terrace. With the main role of preventing accidental falls, the deck railing also serves as exterior decoration. You can order your guardrail from an ironworker, a carpenter, or a specialist in landscaping work. However, you can also build a deck railing yourself. How to create a deck railing? Here is our step by step guide.

Terrace railing: what materials?

To create a deck railing, you will need:

  • Several stainless steels or galvanized posts;
  • Handrail;
  • A fittings ;
  • Screwdriver drill ;
  • Grinder;
  • Cable cutter;
  • Spirit level ;
  • Flat key ;
  • Metre ;
  • Square.

Before starting

Before you start your railing construction work, there are a few rules you should follow. First, the dimensions, layout, and shape of a railing depend on the result you want to achieve: do you want it to kneel, be sealed on a ledge, etc. Then you must take into account the required spacing between the rails. The distance between the first cable rail and the ground must not exceed 11 cm, the minimum required to prevent a child’s head from getting stuck. Likewise, the interval between the beams of a guardrail should not be more than 11 cm. Finally, the span between the posts does not require a maximum or minimum distance. However, if you are not yet a professional, choose a distance of 1.50 m maximum to ensure that the guardrail is solid.

Create support for the guardrail cables

The first thing to do to make a railing yourself is to install the cable support. To do so, follow these simple steps:

  • Disassemble the existing guardrail to see the different points where the posts must be placed.
  • Hold the post plate. Remember to put dowel bolts in the slab.
  • Hide the plate using new tiles. Make sure that the size of the tiles matches that of the floor space.
  • Create the rails by cutting the cable with a length corresponding to the distance between the posts or with a wire of 5 cm maximum.
  • Place a tensioner at the end of each cable. To properly insert the tensioner, you must screw in the same direction as the cable’s strands.
  • Fit the tensioner with a cable tensioner s. You can also choose a hydraulic crimper with a manual pump.
  • Prevent the threaded rod from passing through the post by cutting its end. Equip yourself with a grinder or a hacksaw and cut to less than 40mm.

Note that the tensioner is only an example; you can very well opt for fittings of different shapes: end cap, turnbuckle, lifting ring, quick link, etc.

Put the rails in place

Once the guardrail cable support is installed, you must now think about installing the rails by carrying out these different steps:

  • Drill holes in the intermediate posts and thread the cable through them.
  • Screw the threaded cable onto the starting post.
  • Equip the starting post and the posts on the angles with threaded sleeves and weld them into the holes. This action is not necessary on the intermediate posts.
  • Cut off the end of the cable. Note that the cable should not be shorter than the required dimension.
  • Crimp the hardware.
  • Screw in the threaded rod.
  • Use an open-ended spanner to stretch the cable and tighten the locking nut.
  • Cut the handrail with a grinder. You need to measure its length and cut it at a right angle.
  • Mark the location of the bolt holes on the handrail by positioning it on the posts. You can then drill holes in the same location and with the same diameter using a metal drill.
  • Secure the handrail with pan bolts or countersunk bolts.

Which Tree For A Small Garden?

Whether deciduous or evergreen, a tree remains a centerpiece in a garden, regardless of the space you have to devote to it. Majestic, the tree forms the backbone of the garden around which all the surrounding vegetation revolves. Graphic habit, colorful foliage, smooth flowering or amazing fruiting, worry-free find the one that suits you best, even if space is limited.

Before making your choice

A tree can live for tens or even hundreds of years if planted under favorable conditions in soil and a climate corresponding to it. Sufficient light and regular watering are a guarantee of success.

To ensure a good installation of the roots and, therefore, a good recovery of the subject, dig a hole two to three times wider than the root ball and of a depth equivalent to at least twice its height, which will be filled in with good soil. Garden with organic matter added. Then water abundantly to compact the soil and avoid air pockets. Finally, remember that planting a tree is best done in autumn or winter.

Isolated subjects

Choose an open location so that your tree is visible from several angles. Ideal for cutting the linearity of a lawn, subjects with beautiful bark are essential in the garden; a birch will create a beautiful contrast in winter thanks to its very white bark with silvery reflections. Choose a subject with low development, because this tree can still reach 25 meters in height at maturity depending on the species.

In cool soil and a sunny location, the golden bark of the Prunus maackii (Manchurian cherry) will sparkle like gold. It is adorned in spring with clusters of light, very fragrant white flowers. Its conical port gives it a beautiful appearance as an isolated subject on a lawn or a dam.

Textured, colorful or beautifully cut foliage

If the beauty of the foliage particularly touches you, a Salix integra “hakuro-Nishiki” will fill you with its juvenile leaves tinged with pink and white. Its weeping habit makes it an ideal subject planted in the middle of a lawn. Remember to prune it to induce the appearance of new shoots.

For its ability to survive the stress of pollution, Ginkgo biloba will be another option for city gardens; it already populated the planet 300 million years ago and continues to adorn the approaches to temples in Asia. Its green foliage with a unique fan-shaped cut changes in autumn, thanks to its golden hue, the full significance of its vernacular name: the tree with a thousand crowns. The variety of “tremonia” is ideal for small gardens because it maintains a very narrow habit.

For very sheltered gardens, think of Eucalyptus glaucescens: its juvenile, rounded, bluish-white leaves are very aromatic and diffuse a powerful fragrance in the hot summer heat. Its apetal flowers with many white stamens will arouse the curiosity of the neighborhood.

Spectacular blooms

The Judaea tree remains a must in dry and limestone terrain. Its dark pink flowers appear before the foliage that is sure to mark the arrival of spring.

Give a little Japanese air to your garden by installing an opulent flowering Japanese cherry tree. Very ornamental, it is ideal as an isolated subject on a lawn.

Think of the “crus-galli” hawthorn: a tree with curved needles adorned with a multitude of flowers in June, it will ensure a continuous spectacle: flowering, spherical fruiting followed by a bright red blaze of the foliage from the start. autumn… It only has advantages. Easy to grow, it grows in all soils.

For shady gardens

Indispensable for its ease of cultivation and the persistence of its prickly foliage, variegated according to the species, the holly, of very slow growth, can reach the dimensions of a tree with an erect habit of 6 meters in height at maturity. It will decorate the garden all year round with the beauty of its tough, shiny wavy foliage and the luster and opulence of its bright red berries in the fall.

In a pot on a terrace

In a well sheltered and sunny place, install an orange tree for the sweetness of its fragrance, or even a lemon tree. However, be careful because citrus fruits are not very rustic and will have to be brought in as soon as the cold weather starts. More rustic, a Hibiscus syriacus will delight you with its exotic blooming throughout the summer, while a dwarf lilac will distill its sweet spring scent into your home.